Self Closing Stainless Steel Interleaf Hinge Single Action - 2 hinges

Features
No need to Rabbet on Door or Frames 2.5mm gap is all that is required.

-Automatically closes the door.
-Stainless steel AISI 304-DIN 1.4301.
-To be installed directly, no need to lower the frame or door.
-Spring resistance 500.000 cycles.

As a rule of thumb when fitting hinges to a door or gate allow 150mm in from each end.

If you require 3 Hinges..
Even though you might think your door and frame might be aligned a 1mm difference in the center of the door/gate can make your Door/Gate hard to open and close commonly called "binding"
To overcome binding place 2 hinges at the top and one on the bottom.

Outside materials - blade: SST AISI 304 or AISI 316 polished - adjustable cap and washers: SST AISI 316 Inside materials - inner axle: SST AISI 304 or AISI 316 - inner spring: stainless steel blades set with protective grease Performance - application: suitable for indoor/outdoor installation - automatic return: yes - adjustable return power: yes - maximum door opening: 180º - working cycles: up to 500.000